After $35M renovation, building gets 2nd-highest U.S. Green Building Council certification.  SKANEATELES FALLS  —  Medical-device manufacturer Welch Allyn’s newly renovated and expanded headquarters has received the second-highest Leadership in Energy and Environmental Design (LEED) certification, the company revealed April 2. The headquarters, which is located at 4341 State St. Road in Skaneateles Falls, is now […]

Already an Subcriber? Log in

Get Instant Access to This Article

Become a Central New York Business Journal subscriber and get immediate access to all of our subscriber-only content and much more.

After $35M renovation, building gets 2nd-highest U.S. Green Building Council certification. 

SKANEATELES FALLS  —  Medical-device manufacturer Welch Allyn’s newly renovated and expanded headquarters has received the second-highest Leadership in Energy and Environmental Design (LEED) certification, the company revealed April 2.

The headquarters, which is located at 4341 State St. Road in Skaneateles Falls, is now LEED gold certified by the Washington, D.C.–based U.S. Green Building Council. The Green Building Council has established four levels of LEED certification to recognize green buildings.

Welch Allyn showcased its redone headquarters at a ceremony marking the LEED certification. Work to renovate and expand the building wrapped up in August  2011, about three years after Welch Allyn broke ground on the project, according to the company’s director of operations, Scott Spanfelner. 

The headquarters stood at 225,000 square feet before the expansion, and construction added an additional 124,000 square feet. The project also renovated 80,000 square feet in the existing building.

Syracuse–based QPK Design was the architect for the project. Montour Falls–based Welliver was the general contractor.

Renovations and expansion at the building cost $35 million. Welch Allyn did not provide a breakdown of funding sources, but the company said it received grants from Empire State Development, the New York State Energy Research and Development Authority, and National Grid. It also received tax incentives through the Onondaga County Industrial Development Agency for the project. 

“We created sight lines, large open hallways, and spaces to give greater visibility to the many working functions of our facility,” Spanfelner said during the LEED certification ceremony. “We created large windows and views into [the manufacturing space] in light of our pride as a manufacturer and to provide better visibility and connection to the other business functions in the facility.”

Design elements aimed at minimizing the building’s environmental impact and earning LEED certification include reflective roof materials that limit demand on cooling systems and low-flow water fixtures. The building’s lighting systems also sense natural light coming in through windows and adjust the intensity of lighting as needed.

“We significantly incorporated natural light through skylights and perimeter glass coupled with advanced control systems to automatically adjust high-efficiency powered lighting based on the amount of natural light available,” said Julie Shimer, Welch Allyn president and CEO.

The building’s energy use has increased by just 8 percent, while its size has grown by 55 percent, according to Welch Allyn. Its water consumption has decreased by 25 percent, the company said.

In addition, Welch Allyn transplanted more than 100 trees that had been growing in the expansion’s footprint. And more than 70 percent of construction materials used in the project were manufactured within 500 miles of Welch Allyn.

“When it comes to being environmentally sensitive, ecologically aware, and energy efficient, this building and the renovation of the existing building have done some wonderful things,” said Eric Allyn, co-chair of Welch Allyn’s board of directors. “We’re not here pushing an environmental angle because it’s a fad.”

More than 1,200 employees work at the building. It houses 160,000 square feet dedicated to manufacturing and operations supporting manufacturing. 

The headquarters building also has a customer-service center and space dedicated to product development and administration. In addition, the building houses a fitness center and a cafeteria for employees. 

S. Richard Fedrizzi, the president, CEO, and founding chair of the U.S. Green Building Council, was on hand to make note of the building’s LEED gold certification. Fedrizzi is a native of Camillus.

Welch Allyn was founded in 1915. The company has 2,750 employees in 26 different countries. Its manufacturing operations are in Skaneateles Falls; Beaverton, Ore.; Tijuana, Mexico; Navan, Ireland; and Jungingen, Germany. 

Journal Staff

Recent Posts

Cayuga Health, CRC announce affiliation agreement

ITHACA, N.Y. — Cayuga Health System (CHS), based in Ithaca, and Cancer Resource Center of…

12 hours ago

MACNY wins $6 million federal grant for advanced-manufacturing apprenticeships

DeWITT, N.Y. — MACNY, the Manufacturers Association will use a $6 million federal grant to…

13 hours ago

HUD awards $50 million to help redevelop Syracuse public housing near I-81

SYRACUSE, N.Y. — The Syracuse Housing Authority (SHA) and the City of Syracuse will use…

4 days ago

Parking garage for Wynn Hospital set to open

UTICA, N.Y. — Nearly nine months after Wynn Hospital opened in downtown Utica, its promised…

4 days ago
Advertisement

State comptroller audit finds Dolgeville village treasurer failed to maintain adequate records

DOLGEVILLE, N.Y. — An audit by New York State Comptroller Thomas P. DiNapoli’s office found…

4 days ago

Pathfinder Bancorp to pay latest quarterly dividend in early August

OSWEGO — Pathfinder Bancorp, Inc. (NASDAQ: PBHC), the bank holding company of Pathfinder Bank, has…

4 days ago